2) Create THREE functional gages for the REMAINING dimensions on the large plate that are shaded in BLUE; reference the

[answerhappygod]

2 Create Three Functional Gages For The Remaining Dimensions On The Large Plate That Are Shaded In Blue Reference The 1 (28.2 KiB) Viewed 46 times

2 Create Three Functional Gages For The Remaining Dimensions On The Large Plate That Are Shaded In Blue Reference The 2 (58.11 KiB) Viewed 46 times

2) Create THREE functional gages for the REMAINING dimensions on the large plate that are shaded in BLUE; reference the 'ASSIGN #6 Load Path ANSWERS Rev B', EXERCISE 3 on page 4. Create the FIRST gage for the keyway slot using the ADC Position Feature Control Frames' to locate the keyway width and the 'ADC Profile Feature Control Frames for the tip of the keyway. Create the SECOND gage for the three 'ADC' -20 UNC-2B threaded holes. Create the THIRD gage for the 'AB Profile Feature Control Frame' outer-boundary of the 3-sided plate.
EXERCISE 3: Create 1 Functional Gage for the 'ABC Feature Control Frames. Each FCF must be 'gaged separately BUT all of the 'ABC's may share the same gage. #1 Draw the Datum Reference Frame & calculate the Maximum Material Boundary for the Geometric Counterpart for the Datum Feature of Size: MMB = MMC- Orientation Tolerance. #2 Draw & calculate the MMB for the geometric counterparts for the features to be CONTROLLED: MMB = MMC-Locational Tolerance. 2.120 3.400 1.250 1.003 0030 A BC 0.0020A D .030|A|DOC 9001 R 1.500 - 1/4-20 UNC-287 1.005 ( 592 ALDO 4260 2002 0.001@|A|DOC 2X .400 2x .020 A BMC- BOUNDARY 2X 1.000 2X 600 2X 2.000 90" 3X 45° 020 A B 200 3.000 2x 1/4-20 UNC-2B 90.0056 ABC R.875 *001 1100010A NO - HERE! B R 1.000 . 1.000.000 2X420 .500 1.000 R 1.000 3.200 1.000 5.000 2X 318 002 -000 0.0109ABC 6.250 .500 1.003 70.005 A-0.005A BOUNDARY 002 - 2002 BOUNDARY INTERPRET THIS DRAWING 4X 520.005 PER ASME Y14. SM, 1994 PLTZ 0.030 A BC ALL UNTOLERANCED DIMENSIONS 20070 A FRTZFL WARE BASIC EQUIVELEHT CALLOUTS!