6. A commercial set of straight bevel gear and pinion is used to transmit rotary motion between intersecting shafts. The

[answerhappygod]

6 A Commercial Set Of Straight Bevel Gear And Pinion Is Used To Transmit Rotary Motion Between Intersecting Shafts The 1 (39.61 KiB) Viewed 32 times

6. A commercial set of straight bevel gear and pinion is used to transmit rotary motion between intersecting shafts. The gear and pinion shafts intersect at 90° and the tooth form is a full-depth involute with a pressure angle of 20°. The gear and pinion are operating at 10 hp with the following data applications. Determine the thrust load on the pinion. (A) 26 lbf (B) 52 lbf Prich angle (C) 103 lbf Ydriver) (D) 324 lbf Pinion Cene distance Uniform Pichage Gear Diametral pitch (P) 6/in Number of teeth (N) 40 Operating speed (n) 600 rpm Shaft diameter(D) 2 % in Pinlon 6/in 20 Gear (driven) De 1 x in