- Matlab Must Be Used In Order To Solve Otherwise It Is Incorrect And Will Be Reported 1 (52.15 KiB) Viewed 15 times
- Matlab Must Be Used In Order To Solve Otherwise It Is Incorrect And Will Be Reported 2 (52.15 KiB) Viewed 15 times
MATLAB MUST BE USED IN ORDER TO SOLVE OTHERWISE IT IS INCORRECT AND WILL BE REPORTED
-
answerhappygod
- Site Admin
- Posts: 899604
- Joined: Mon Aug 02, 2021 8:13 am
MATLAB MUST BE USED IN ORDER TO SOLVE OTHERWISE IT IS INCORRECT AND WILL BE REPORTED
MATLAB MUST BE USED IN ORDER TO SOLVE OTHERWISE IT IS INCORRECT AND WILL BE REPORTED
K(s) (s +2+GN) (s +GN)(s’ +4) Your tasks for this project are to: 1. Design a controller for each of the following methods (if possible) or state that such a controller is not possible: (a) P (K(s)=Kp) (b) PD (K(s) = K (1+Tas), Ta can be assumed as -0.2) (c) PI (K(s) = K (1+1/T;s), Tcan be assumed to be 1) (d) PID (K(s) = K (1 + 1/Ts + Tus), assume Ta is-0.13, and T, is -0.5) 2. For each method, discuss how variations in design parameters would affect the performance of the system in terms of the design criteria. For each case, state reasons why your selected design may be superior to other possible designs which would also meet the design criteria, 3. Plot a unit-step response of the resulting closed loop system corresponding to your design using each method. Discuss how these responses compare with your expectations based on (transient and steady state) design specifications and controller configuration. Specifically mention expected percent overshoot, settling time, stability, and steady state error.
K(s) (s +2+GN) (s +GN)(s’ +4) Your tasks for this project are to: 1. Design a controller for each of the following methods (if possible) or state that such a controller is not possible: (a) P (K(s)=Kp) (b) PD (K(s) = K (1+Tas), Ta can be assumed as -0.2) (c) PI (K(s) = K (1+1/T;s), Tcan be assumed to be 1) (d) PID (K(s) = K (1 + 1/Ts + Tus), assume Ta is-0.13, and T, is -0.5) 2. For each method, discuss how variations in design parameters would affect the performance of the system in terms of the design criteria. For each case, state reasons why your selected design may be superior to other possible designs which would also meet the design criteria, 3. Plot a unit-step response of the resulting closed loop system corresponding to your design using each method. Discuss how these responses compare with your expectations based on (transient and steady state) design specifications and controller configuration. Specifically mention expected percent overshoot, settling time, stability, and steady state error.
Join a community of subject matter experts. Register for FREE to view solutions, replies, and use search function. Request answer by replying!