Page 1 of 1
1. A 60mm diameter shaft is subjected to axial forces of 50kN and 120kN as shown in Figure 1. Given the diameter of the
Posted: Fri Apr 29, 2022 10:31 am
by answerhappygod
- 1 A 60mm Diameter Shaft Is Subjected To Axial Forces Of 50kn And 120kn As Shown In Figure 1 Given The Diameter Of The 1 (54.3 KiB) Viewed 28 times
1. A 60mm diameter shaft is subjected to axial forces of 50kN and 120kN as shown in Figure 1. Given the diameter of the collar (A) and (B) are 100mm and connected to the shaft. The shaft can pass through the rigid steel support. (Ignore any friction between the shaft and rigid steel where 3mm in Figure 1 is the clear gap between shaft and support). Collar A Collar B 50 kN 100 120 kN Rigid steel support All dimensions are in mm Figure 1 a. Determine the axial stress in the shaft. (5 marks) (CO2) b. Determine the bearing stress between the collar (A or B) and the support when the collar (A or B) and the support are in contact. (5 marks) (CO2) c. Determine the maximum shear stress between the collar and shaft when the collar (A or B) and the support are in contact. (5 marks) (CO2)