Page 1 of 1
5. An oil pump is drawing 40 kW of electric power while pumping oil with p = 860 kg/m3 at a rate of 0.1 m²/s. The inlet
Posted: Fri Apr 29, 2022 10:00 am
by answerhappygod
- 5 An Oil Pump Is Drawing 40 Kw Of Electric Power While Pumping Oil With P 860 Kg M3 At A Rate Of 0 1 M S The Inlet 1 (38.33 KiB) Viewed 28 times
5. An oil pump is drawing 40 kW of electric power while pumping oil with p = 860 kg/m3 at a rate of 0.1 m²/s. The inlet and outlet diameters of the pipe are 8 cm and 12 cm, respectively. If the pressure rise of oil in the pump is measured to be 400 kPa and the motor efficiency is 90 percent, determine the mechanical efficiency of the pump. Take the kinetic energy correction factor to be 1.05. 40KW 12 cm Pump Motor 8 cm Oill AP = 400 kPa 0.1 m/s Figure 2