Page 1 of 1
n It is necessary to transmit 600 hps of power from a motor rotating at 3000 rpm to a shaft which must rotate at 750 rpm
Posted: Fri Apr 29, 2022 9:40 am
by answerhappygod
- N It Is Necessary To Transmit 600 Hps Of Power From A Motor Rotating At 3000 Rpm To A Shaft Which Must Rotate At 750 Rpm 1 (61.77 KiB) Viewed 14 times
n It is necessary to transmit 600 hps of power from a motor rotating at 3000 rpm to a shaft which must rotate at 750 rpm, using spur gears with a pressure angle of 20°. The distance between the two shafts is approximately 15". Both gears are to be fabricated of fully hardened and machined Grade 2 Steel, with a wear contact strength of 155,000 psi, and a bending strength of 30,000 psi. Determine the diametral pitch, the maximum number of teeth of both gears, and the tooth depth.