Answer Happy

CLOs and PLOs for Complex Engineering Problem (Theory+ Lab= 10+5) Please state CLOs and PLOs addressed in the complex engineering problem along with domain and level. These are the CLOs from the theory/lab course which are already defined. CLOS Description Domains & Levels PLOS, Levels CLO1 PLO6 High CLO2 Theory Design of an overhead high voltage Cognitive, 6 transmission line. Demonstrate the application of basic Psychomotor, 3 compensation techniques in the planning of an interconnected power system Lab PLO3 Medium Problem Statement It is proposed to transmit 100 MW at 0.9 power factor lagging over a distance of 200 km from Mangla to Lahore. Under full load conditions, the limit for voltage regulation and efficiency is 15% and 95% respectively. Work out the following details of transmission line: 1. Select line voltage and number of circuits 2. Choose appropriate conductor and span for this line 3. Select a suitable value of inter-phase spacing and a suitable configuration of conductors 4. Calculate line parameters. Estimate the line efficiency and voltage regulation for full load conditions. 5. Select a suitable compensation equipment to increase the capacity of line to a maximum level. 6. Determine the capacity of shunt compensation equipment to improve the receiving end power factor to 0.95 lagging. You may make suitable assumptions, but they must be clearly mentioned. 7. Use a simulation tool to demonstrate the effectiveness of the designed shunt compensation.
Complete Evaluation Rubrics Rubrics Good,3 Unsatisfactory Satisfactory, 1 ,1 Very Good,4 Comprehensive,5 Literature Review (Theory) No apparent literature review Good research Mediocre research which may or may not lead to an adequate solution Ill structured methodology Very good research, leading to a successful solution Contains all the information needed for solving the problem Design Methodology (Theory) No planned method Good methodolo ВУ Very good methodology Comprehensive methodology Development of Simulation Model (Lab) Model was not Model was implemented implemented with approximations No handout Report (Theory) Mediocre information which may or may not lead to a solution Model was Model was Model was adequately adequately comprehensive implement implemented implemented ed with with with high reasonably reasonably accuracy and accuracy accuracy, all reactive and few power reactive compensation power methods compensatio applied n methods applied Good Very good All of the informatio information necessary n organized information well, that clearly could lead to organized for a good easy use in solution solving the problem Conclusion Conclusions Conclusions s were were were presented presented reasonably in quite well presented a good manner Conclusions (Theory) Conclusions were not written or entirely wrong Conclusions were presented but not adequately