Answer Happy

Assignment 5 15% a You are automation engineers for a production system, which controls the movement of parts along a conveyor system. You are responsible for overseeing PLC programming and wiring you have been given the task of converting the requirements outlined below into ladder logic for the system and testing the operation To aid future work with the system you are also required to define the inputs. When Button A is pressed LED 1 switches on and when Button B is pressed LED 2 switches on. The motor starts when LED 1 and LED 2 have been activated, but both LEDs do not need to be on at the same time for the conveyor to move. They simply have to have been on previously When the motor is activated, the part travels along the conveyor until a sensor is activated, at this point the conveyor stops, the part is ejected using a single acting cylinder and the system is reset. Requirements Inputs Button Axi Button 8x2 Sensor 3 Outputs Motor yo LED 177 LED 2 8 Single Acting Cylinder 9