A full journal bearing has a journal diameter of 25 mm. The bushing bore has a diameter of 25.03 mm. The l/d ratio is 1/
Posted: Wed Apr 27, 2022 7:32 pm
A full journal bearing has a journal diameter of 25 mm. The
bushing bore has a diameter of 25.03 mm. The l/d ratio is 1/2. The
load is 1.2 kN and the journal runs at 1100 rev/min. If the average
viscosity is 55 mPa.s, find the following: (a) Minimum film
thickness (b) The power loss, and (c) The side flow for the minimum
clearance assembly.
bushing bore has a diameter of 25.03 mm. The l/d ratio is 1/2. The
load is 1.2 kN and the journal runs at 1100 rev/min. If the average
viscosity is 55 mPa.s, find the following: (a) Minimum film
thickness (b) The power loss, and (c) The side flow for the minimum
clearance assembly.