Page 1 of 1
Toe Hinge-Pins Heel The brake shown in Fig. 1 is R-170 mm inner radius of the drum and is actuated by two hydraulic pist
Posted: Wed Apr 27, 2022 7:27 pm
by answerhappygod
- Toe Hinge Pins Heel The Brake Shown In Fig 1 Is R 170 Mm Inner Radius Of The Drum And Is Actuated By Two Hydraulic Pist 1 (49.15 KiB) Viewed 38 times
Toe Hinge-Pins Heel The brake shown in Fig. 1 is R-170 mm inner radius of the drum and is actuated by two hydraulic pistons that exerts the same force F =2700N, on each shoe. The shoes are identical and have the same unknown face width. The lining material has a coefficient of friction 0.3 and a maximum pressure of Po=1050 kPa. The other dimensions are 0 = 1300, a= 21° B-290, p = 150 mm, d = 46 mm Determine the (a) The face width in millimeters. (b) Pressure in the left-hand shoe in (kPa). (c) The braking torque in (Nm).