Answer Happy

I'll upvote if correct, please show all work and include
simulations and HOW you got the values. Thanks!
EE-305 DESIGN PROJECT 2 Spring 2022 You plan to start your own business in home healthcare upon graduation. The first device you decided to market is a wireless monitoring system. You approached the FCC and got a license to use no more than 1-mW at 300 kHz. However, you found that there are two equally strong signals operating at frequencies of 260 kHz and 350 kHz coming from other systems. Design a passive electrical circuit that will keep these two undesired signals at least 3-dB down. Use only resistors, capacitors, and inductors and do everything possible to minimize cost. (Ref: Stadtmiller, Electronics Project Management and Design, NJ: Prentice Hall, 2001, Chapter9) Assume that you only have access to the components in your kit. If your kit does not contain the exact value you need, use the next closest value available. . Discuss the ramifications of not having the exact values you need Specify the worst-case tolerances for your design Make sure the ratings of your components are not exceeded (i.e. power, voltage and current) Your product design process must consider public health, safety, global, social, and environmental factors. Again, cost, size, and power consumption are all issues that should be addressed. These parameters should be minimized to the extent possible. You should design this circuit analytically, debug it in Spice, and build and test it in the lab. All of your results should be included in the submitted report.