Page 1 of 1
= = - Use kBT/q= 26mV, un Cox= 100uAN?, Mp Cox= 40UAN?, Vthn= Vthpl = 0.5V Ignore the channel length modulation an = 1p=
Posted: Wed Apr 27, 2022 6:09 pm
by answerhappygod
- Use Kbt Q 26mv Un Cox 100uan Mp Cox 40uan Vthn Vthpl 0 5v Ignore The Channel Length Modulation An 1p 1 (454.98 KiB) Viewed 45 times
= = - Use kBT/q= 26mV, un Cox= 100uAN?, Mp Cox= 40UAN?, Vthn= Vthpl = 0.5V Ignore the channel length modulation an = 1p= 0) except as noted. 5. In Fig. 5, (W/L)1=(100u/0.5u) and Vpp = 5V. Determine R1 and R2 so that the / following requirements are satisfied. (20) = VOD RA m a. Nominal value of Ip1 is 100 UA. My b. When Vthn varies between 0.5V and 0.45V, the 101 should remain between 100 UA and 110 UA. 100k R2 C. R2 should be as small as possible. GND Figure 5