Page 1 of 1
= = Use koT/q= 26mV, un Cox= 1004A/V2, Mp Cox= 404AN? Vthn= |Vtnpl = 0.5V Ignore the channel length modulation (n = 1p=
Posted: Wed Apr 27, 2022 6:09 pm
by answerhappygod
- Use Kot Q 26mv Un Cox 1004a V2 Mp Cox 404an Vthn Vtnpl 0 5v Ignore The Channel Length Modulation N 1p 1 (171.42 KiB) Viewed 36 times
= = Use koT/q= 26mV, un Cox= 1004A/V2, Mp Cox= 404AN? Vthn= |Vtnpl = 0.5V Ignore the channel length modulation (n = 1p= 0) except as noted. 5. In the amplifier of Fig. 5 (a), Vpo=3V, (W/L)2=(W/L)2=10um/0.1um, V8=1V, 1=0.11. Fig. 4 (b) plots the gain of the amplifier as a function of the input voltage. TVDO A Vina M AL -o Vout VB M2 V Vin Fig. 5 (a) Fig. 5 (b) (a) Fig. 5 (b) shows that the amplifier operates properly only when Vin > Vį. Determine Vz. Note that the amplifier operates properly only if every transistor is in the saturation region. (b) Determine A1