IV. BSF( Band Stop Filter) 1. Design scries RLC BSF with Q-10 and f-Skle, assume R-IK Calculate and draw the circuit in
Posted: Wed Apr 27, 2022 6:07 pm
- Iv Bsf Band Stop Filter 1 Design Scries Rlc Bsf With Q 10 And F Skle Assume R Ik Calculate And Draw The Circuit In 1 (31.57 KiB) Viewed 48 times
- Iv Bsf Band Stop Filter 1 Design Scries Rlc Bsf With Q 10 And F Skle Assume R Ik Calculate And Draw The Circuit In 2 (50.87 KiB) Viewed 48 times
2. Use breadboard to construct the series RLC BSF circuit. Set the function generator for 1KHz, sine wave at 5VP, then measure the output voltage with the oscilloscope. 3. Change the input signal frequency, measure the output voltage and record the readings at Table.4 below. 4. Use the values in Table.4 to draw the Bode plot on the logarithmic paper (4) below. (show all the needed values on the graph) 5. Use Bode Plot instrument in Multisim to draw the Bode plot curve and compare it with the Bode plot in step 4 above. Write your comments at comment box#4 below: Frequency 1 2 KHZ 3 5 7 8 9 10 Vo Gain-Vo/Vin Gain in dB Table 4 10 dB -10