750 mm T 1. 175 mm 1000 mm 9-36 mm dikmeter bars O O оо O 350 mm
Posted: Wed Apr 27, 2022 2:51 pm
- 1 (32.18 KiB) Viewed 35 times
poured monolithically and formed a T- section as shown. Determine
the design strength φMn in accordance with the ACI/NSCP Code. The
tension steel is 9– 36 mm diameter bars (As of 36 mm = 1006 mm2)
with three bars in each of three layers. Assume 12 mm stirrups are
used, and there is 25 mm between layers. Use fc′ = 28 MPa and fy =
413.70 MPa
750 mm T 1. 175 mm 1000 mm 9-36 mm dikmeter bars O O оо O 350 mm