Refer to the exhibit. Which configuration is missing to complete the configuration task of enabling BFD with the 192.16
Posted: Sat Jul 23, 2022 7:19 pm
Refer to the exhibit.
Which configuration is missing to complete the configuration task of enabling BFD with the 192.168.1.1 EBGP peer?
A. bfd fast-detect also needs to be enabled globally under router bgp 64500 RP/0/RSP0/CPU0:P1(config-bgp)#bfd fast-detect
B. bfd fast-detect also needs to be enabled for the address-family under address-family ipv4 unicast RP/0/RSP0/CPU0:P1(config-bgp-af)#bfd fast-detect
C. bfd fast-detect also needs to be enabled for the 192.168.1.1 neighbor under neighbor 192.168.1.1 RP/0/RSP0/CPU0:P1(config-bgp-nbr)#bfd fast-detect
D. bfd fast-detect also needs to be enabled for the 192.168.1.1 neighbor address-family under neighbor 192.168.1.1 address-family ipv4 unicast RP/0/RSP0/ CPU0:P1(config-bgp-nbr-af)#bfd fast-detect
E. bfd fast-detect also needs to be enabled globally on the router RP/0/RSP0/CPU0:P1(config)#bfd fast-detect
Which configuration is missing to complete the configuration task of enabling BFD with the 192.168.1.1 EBGP peer?
- Refer To The Ex 1 (4.72 KiB) Viewed 81 times
B. bfd fast-detect also needs to be enabled for the address-family under address-family ipv4 unicast RP/0/RSP0/CPU0:P1(config-bgp-af)#bfd fast-detect
C. bfd fast-detect also needs to be enabled for the 192.168.1.1 neighbor under neighbor 192.168.1.1 RP/0/RSP0/CPU0:P1(config-bgp-nbr)#bfd fast-detect
D. bfd fast-detect also needs to be enabled for the 192.168.1.1 neighbor address-family under neighbor 192.168.1.1 address-family ipv4 unicast RP/0/RSP0/ CPU0:P1(config-bgp-nbr-af)#bfd fast-detect
E. bfd fast-detect also needs to be enabled globally on the router RP/0/RSP0/CPU0:P1(config)#bfd fast-detect