Which settings are required when deploying Cisco IPS in high-availability mode using EtherChannel load balancy?
Posted: Fri Jul 22, 2022 5:23 pm
Which settings are required when deploying Cisco IPS in high-availability mode using EtherChannel load balancy?
A. ECLB IPS appliances must be in on-a-stick mode, ECLB IPS solution maintains state if a sensor goes down, and TCP flow is forced through the same IPS appliance.
B. ECLB IPS appliances must not be in on-a-stick mode, ECLB IPS solution maintains state if a sensor goes down, and TCP flow is forced through the same IPS appliance flow
C. ECLB IPS appliances must be in on-a-stick mode, ECLB IPS solution does not maintain state if a sensor goes down, and TCP flow is forced through a different IPS appliance.
D. ECLB IPS appliances must not be in on-a-stick mode, ECLB IPS solution does not maintain state if a sensor goes down, and TCP flow is forced through a different IPS appliance.
A. ECLB IPS appliances must be in on-a-stick mode, ECLB IPS solution maintains state if a sensor goes down, and TCP flow is forced through the same IPS appliance.
B. ECLB IPS appliances must not be in on-a-stick mode, ECLB IPS solution maintains state if a sensor goes down, and TCP flow is forced through the same IPS appliance flow
C. ECLB IPS appliances must be in on-a-stick mode, ECLB IPS solution does not maintain state if a sensor goes down, and TCP flow is forced through a different IPS appliance.
D. ECLB IPS appliances must not be in on-a-stick mode, ECLB IPS solution does not maintain state if a sensor goes down, and TCP flow is forced through a different IPS appliance.