FabricPath switch- id is 25 and load-balance is configured for L3/L4 and rotate amount is 14 byte. What information is t
Posted: Fri Jul 22, 2022 3:55 pm
FabricPath switch- id is 25 and load-balance is configured for L3/L4 and rotate amount is 14 byte. What information is true about FabricPath switch-id?
A. FabricPath topology requires manual configuration of switch-id which has a range from 1 to 4095
B. Every FabricPath must have a manually configured switch-id for it to form a FabricPath topology
C. FabricPath topology requires manual configuration of switch-id which has a range from 1 to 4099
D. You do not have to manually assign a switch ID unless you are running a virtual port channel plus (vPC*) because the system assigns a switch ID for you when you enable FabricPath
- Fabricpath Swit 1 (96.06 KiB) Viewed 57 times
- Fabricpath Swit 2 (34.9 KiB) Viewed 57 times
- Fabricpath Swit 3 (95.06 KiB) Viewed 57 times
- Fabricpath Swit 4 (66.02 KiB) Viewed 57 times
B. Every FabricPath must have a manually configured switch-id for it to form a FabricPath topology
C. FabricPath topology requires manual configuration of switch-id which has a range from 1 to 4099
D. You do not have to manually assign a switch ID unless you are running a virtual port channel plus (vPC*) because the system assigns a switch ID for you when you enable FabricPath