Answer Happy

Case study.

Some notices from above configuration:
+The OSPF network type between R2&R3 is non broadcast.

Q1: Show ip ospf database -
Q2: Show ip ospf interface serial 1/0

Q3: Show ip ospf -

Q4: Show ip route -
You have been asked to evaluate an OSPF network and to answer questions a customer has about its operation. Note: You are not allowed to use the show command. running-config

Although in this sim we are not allowed to use "show running-config" command but we post the configuration here so that you can understand more about the topology.

R1 -
interface Loopback0
ip address 1.1.1.1 255.255.255.255
no shut
interface Serial0/0
ip address 192.168.13.1 255.255.255.0
ip ospf network non-broadcast
no shut
router ospf 1
network 192.168.13.0 0.0.0.255 area 0
network 1.1.1.1 0.0.0.0 area 0
_______________________________________

R2 -
interface Loopback 0
ip address 2.2.2.2 255.255.255.255
no shut
interface S0/0
ip address 192.168.23.2 255.255.255.0
ip ospf network non-broadcast
no shut
router ospf 1
network 192.168.23.0 0.0.0.255 area 0
network 2.2.2.2 0.0.0.0 area 0
neighbor 192.168.23.3
_________________________________________________

R3 -
interface Loopback 0
ip address 3.3.3.3 255.255.255.255
no shut
interface fa0/0
ip address 192.168.34.3 255.255.255.0
no shut
interface S0/1
ip address 192.168.23.3 255.255.255.0
ip ospf network non-broadcast
no shut
interface S0/0
ip address 192.168.13.3 255.255.255.0
ip ospf network non-broadcast
no shut
router ospf 1
network 192.168.13.0 0.0.0.255 area 0
network 192.168.23.0 0.0.0.255 area 0
network 192.168.34.0 0.0.0.255 area 1
network 3.3.3.3 0.0.0.0 area 0
area 1 virtual-link 4.4.4.4
neighbor 192.168.23.2
_______________________________________________________________

R4 -
interface Loopback 0
ip address 4.4.4.4 255.255.255.255
interface FastEthernet0/0
ip address 192.168.34.4 255.255.255.0
interface Fa0/1
ip address 192.168.45.4 255.255.255.0
no shut
interface Fa1/0
ip address 192.168.46.4 255.255.255.0
no shut
router ospf 1
network 192.168.34.0 0.0.0.255 area 1
network 192.168.45.0 0.0.0.255 area 2
network 192.168.46.0 0.0.0.255 area 3
network 4.4.4.4 0.0.0.0 area 1
area 1 virtual-link 3.3.3.3
area 2 nssa
area 3 stub no-summary
_________________________________________________________________

R5 -
interface Loopback0
ip address 5.5.5.5 255.255.255.255
interface Loopback1
ip address 5.5.1.1 255.255.255.255
interface Loopback2
ip address 5.5.2.1 255.255.255.255
interface Loopback3
ip address 5.5.3.1 255.255.255.255
interface Loopback4
ip address 5.5.4.1 255.255.255.255
no shut
interface Fa0/0
ip address 192.168.45.5 255.255.255.0
no shut
router ospf 1
network 192.168.45.0 0.0.0.255 area 2
network 5.5.0.0 0.0.255.255 area 2
area 2 nssa
_______________________________________________

R6 -
interface Fa0/0
ip address 192.168.46.6 255.255.255.0
no shut
interface Loopback 0
ip address 6.6.6.6 255.255.255.255
no shut
router ospf 1
network 192.168.46.0 0.0.0.255 area 3
network 6.6.6.6 0.0.0.0 area 3
area 3 stub
Areas of Router 5 and 6 are not normal areas, inspect their routing tables and determine which statement is true?
A. R5"²s Loopback and R6"²s Loopback are both present in R5"²s Routing table
B. R5"²s Loopback and R6"²s Loopback are both present in R6"²s Routing table
C. Only R5"²s loopback is present in R5"²s Routing table
D. Only R6"²s loopback is present in R5"²s Routing table
E. Only R5"²s loopback is present in R6"²s Routing table