Page 1 of 1

Scenario: There are two call control systems in this item. The Cisco UCM is controlling the DX650, the Cisco Jabber for

Posted: Fri Jul 22, 2022 3:38 pm
by answerhappygod
Scenario:
There are two call control systems in this item. The Cisco UCM is controlling the DX650, the Cisco Jabber for Windows Client, and the 9971 Video IP Phone.
The Cisco VCS and TMS control the Cisco TelePresence MCU, and the Cisco Jabber TelePresence for Windows.
DP:

Locations:

CSS:

SRST:

SRST-BR2-Config:

BR2 Config:

SRSTPSTNCall:

After configuring the CFUR for the directory number that is applied to BR2 phone (+442288224001), the calls fail from the PSTN. Which two of the following configurations if applied to the router, would remedy this situation? (Choose two.)
Scenario There  1
Scenario There 1 (45.16 KiB) Viewed 53 times
Scenario There  2
Scenario There 2 (35.4 KiB) Viewed 53 times
Scenario There  3
Scenario There 3 (136.5 KiB) Viewed 53 times
Scenario There  4
Scenario There 4 (626.73 KiB) Viewed 53 times
Scenario There  5
Scenario There 5 (29 KiB) Viewed 53 times
Scenario There  6
Scenario There 6 (85.78 KiB) Viewed 53 times
Scenario There  7
Scenario There 7 (263.16 KiB) Viewed 53 times
A. dial-peer voice 1 pots incoming called-number 228822 direct-inward-dial port 0/0/0:15
B. dial-peer voice 1 pots incoming called-number 228822 direct-inward-dial port 0/0/0:13
C. voice translation-rule 1 rule 1/228821....S//+44&/ exit ! voice translation-profile pstn-in translate called 1 ! voice-port 0/0/0:15 translation-profile incoming pstn-in
D. voice translation-rule 1 rule 1/228822....S//+44&/ exit ! voice translation-profile pstn-in translate called 1 ! voice-port 0/0/0:15 translation-profile incoming pstn-in
E. The router does not need to be configured.