You are a junior network engineer for a financial company, and the main office network is experiencing network issues.
Posted: Fri Jul 22, 2022 12:59 pm
You are a junior network engineer for a financial company, and the main office network is experiencing network issues. Troubleshoot the network issues.
Router R1 connects the main office to the Internet, and routers R2 and R3 are internal routers.
NAT is enabled on router R1.
The routing protocol that is enabled between routers R1, R2 and R3 is RIPv2.
R1 sends the default route into RIPv2 for the internal routers to forward Internet traffic to R1.
You have console access on R1, R2 and R3 devices. Use only show commands to troubleshoot the issues.
Why applications that are installed on PCs in R2 LAN network 10.100.20.0/24 are unable to communicate with server1?
A. A standard ACL statement that is configured on R1 is blocking the traffic sourced from Server1 network.
B. A standard ACL statement that is configured on R2 is blocking the traffic sourced from Server1 network.
C. A standard ACL statement that is configured on R2 is blocking the traffic sourced from R2 network.
D. A standard ACL statement that is configured on R1 is blocking traffic sourced from R2 LAN network.
Router R1 connects the main office to the Internet, and routers R2 and R3 are internal routers.
NAT is enabled on router R1.
The routing protocol that is enabled between routers R1, R2 and R3 is RIPv2.
R1 sends the default route into RIPv2 for the internal routers to forward Internet traffic to R1.
You have console access on R1, R2 and R3 devices. Use only show commands to troubleshoot the issues.
Why applications that are installed on PCs in R2 LAN network 10.100.20.0/24 are unable to communicate with server1?
- You Are A Junio 1 (26.53 KiB) Viewed 51 times
B. A standard ACL statement that is configured on R2 is blocking the traffic sourced from Server1 network.
C. A standard ACL statement that is configured on R2 is blocking the traffic sourced from R2 network.
D. A standard ACL statement that is configured on R1 is blocking traffic sourced from R2 LAN network.