Scenario - Refer to the topology. Your company has decided to connect the main office with three other remote branch off
Posted: Fri Jul 22, 2022 12:58 pm
Scenario -
Refer to the topology. Your company has decided to connect the main office with three other remote branch offices using point-to-point serial links.
You are required to troubleshoot and resolve OSPF neighbor adjacency issues between the main office and the routers located in the remote branch offices.
Use appropriate show commands to troubleshoot the issues and answer all four questions.
Instructions -
An OSPF neighbor adjacency is not formed between R3 in the main office and R6 in the Branch3 office. What is causing the problem?
A. There is an area ID mismatch.
B. There is a PPP authentication issue; the username is not configured on R3 and R6.
C. There is an OSPF hello and dead interval mismatch.
D. The R3 router ID is configured on R6. D
Refer to the topology. Your company has decided to connect the main office with three other remote branch offices using point-to-point serial links.
You are required to troubleshoot and resolve OSPF neighbor adjacency issues between the main office and the routers located in the remote branch offices.
Use appropriate show commands to troubleshoot the issues and answer all four questions.
Instructions -
An OSPF neighbor adjacency is not formed between R3 in the main office and R6 in the Branch3 office. What is causing the problem?
- Scenario Refer 1 (244.59 KiB) Viewed 43 times
- Scenario Refer 2 (10.27 KiB) Viewed 43 times
- Scenario Refer 3 (8.8 KiB) Viewed 43 times
- Scenario Refer 4 (9.4 KiB) Viewed 43 times
- Scenario Refer 5 (10.16 KiB) Viewed 43 times
- Scenario Refer 6 (9.48 KiB) Viewed 43 times
- Scenario Refer 7 (11.66 KiB) Viewed 43 times
- Scenario Refer 8 (10.73 KiB) Viewed 43 times
B. There is a PPP authentication issue; the username is not configured on R3 and R6.
C. There is an OSPF hello and dead interval mismatch.
D. The R3 router ID is configured on R6. D