Scenario - Refer to the topology. Your company has decided to connect the main office with three other remote branch off
Posted: Fri Jul 22, 2022 12:58 pm
Scenario -
Refer to the topology. Your company has decided to connect the main office with three other remote branch offices using point-to-point serial links.
You are required to troubleshoot and resolve OSPF neighbor adjacency issues between the main office and the routers located in the remote branch offices.
Use appropriate show commands to troubleshoot the issues and answer all four questions.
Instructions -
R1 does not form an OSPF neighbor adjacency with R2. Which option would fix the issue?
A. R1 ethernet0/1 is shutdown. Configure no shutdown command.
B. R1 ethernet0/1 configured with a non-default OSPF hello interval of 25; configure no ip ospf hello-interval 25
C. R2 ethernet0/1 and R3 ethernet0/0 are configured with a non-default OSPF hello interval of 25; configure no ip ospf hello-interval 25
D. Enable OSPF for R1 ethernet0/1; configure ip ospf 1 area 0 command under ethernet0/1. B
Refer to the topology. Your company has decided to connect the main office with three other remote branch offices using point-to-point serial links.
You are required to troubleshoot and resolve OSPF neighbor adjacency issues between the main office and the routers located in the remote branch offices.
Use appropriate show commands to troubleshoot the issues and answer all four questions.
Instructions -
R1 does not form an OSPF neighbor adjacency with R2. Which option would fix the issue?
- Scenario Refer 1 (244.59 KiB) Viewed 43 times
- Scenario Refer 2 (10.27 KiB) Viewed 43 times
- Scenario Refer 3 (8.8 KiB) Viewed 43 times
- Scenario Refer 4 (9.4 KiB) Viewed 43 times
- Scenario Refer 5 (10.16 KiB) Viewed 43 times
- Scenario Refer 6 (9.48 KiB) Viewed 43 times
- Scenario Refer 7 (11.66 KiB) Viewed 43 times
- Scenario Refer 8 (10.73 KiB) Viewed 43 times
B. R1 ethernet0/1 configured with a non-default OSPF hello interval of 25; configure no ip ospf hello-interval 25
C. R2 ethernet0/1 and R3 ethernet0/0 are configured with a non-default OSPF hello interval of 25; configure no ip ospf hello-interval 25
D. Enable OSPF for R1 ethernet0/1; configure ip ospf 1 area 0 command under ethernet0/1. B