plotter load: 500g Input Current Flow: 10L/min The output signal is as follows: a)Calculate and plot the residence time
Posted: Thu Jul 14, 2022 3:32 pm
plotter load: 500g
Input Current Flow: 10L/min
The output signal is as follows:
a)Calculate and plot the residence time distribution (E(t)curve) and calculate the observed mean time.
b)Determine the fraction of current that remains between 4 and 9min inside the reactor.
c)Calculate the conversion that would be obtained by applyingthe segregation model and the model of ponds in series (considerinitial concentration, Ca0= 5mol/l). Compare with the conversionthat would be obtained if plug flow is assumed. Discuss yourresults.
Input Current Flow: 10L/min
The output signal is as follows:
- Plotter Load 500g Input Current Flow 10l Min The Output Signal Is As Follows A Calculate And Plot The Residence Time 1 (12.95 KiB) Viewed 56 times
b)Determine the fraction of current that remains between 4 and 9min inside the reactor.
c)Calculate the conversion that would be obtained by applyingthe segregation model and the model of ponds in series (considerinitial concentration, Ca0= 5mol/l). Compare with the conversionthat would be obtained if plug flow is assumed. Discuss yourresults.