Page 1 of 1
A steel pipe with an outside diameter of 4.2 in and in inside diameter of 3.15 in is simply supported at its ends and ca
Posted: Thu Jul 14, 2022 2:51 pm
by answerhappygod
- A Steel Pipe With An Outside Diameter Of 4 2 In And In Inside Diameter Of 3 15 In Is Simply Supported At Its Ends And Ca 1 (55.57 KiB) Viewed 34 times
A steel pipe with an outside diameter of 4.2 in and in inside diameter of 3.15 in is simply supported at its ends and carries two concentrated loads F1=980lb and F2=2180lb as shown. If a=2.9ft,b=16.5ft and c=1.9ft, determine: (a) The flexural stress at point A on section A-A through the beam if it is 5.4ft from the right support. (b) The flexural stress at point B on section A−A through the beam if it is 5.4ft from the right support. (c) The maximum flexural stress anywhere in the beam. Denote a tensile stress as a positive value and a compressive stress as a negative value. (a) σA= psi (b) σB= psi (c) σmax= psi