The manufacturing specification for a part is: 4.20 ± 0.40 inches. Identify the following values: Target (use 1 decimal)
Posted: Thu Jul 14, 2022 2:44 pm
The manufacturing specification for a part is: 4.20 ± 0.40inches. Identify the following values:
Target (use 1 decimal)
Nominal dimension (use 1 decimal)
Upper specification limit (use 1 decimal)
Lower specification limit (use 1 decimal)
Tolerance ± (use 1 decimal)
Target (use 1 decimal)
Nominal dimension (use 1 decimal)
Upper specification limit (use 1 decimal)
Lower specification limit (use 1 decimal)
Tolerance ± (use 1 decimal)