Page 1 of 1
A flanged wooden shape is used to support the loads shown on the beam. The dimensions of the shape are shown in the seco
Posted: Thu Jul 14, 2022 2:38 pm
by answerhappygod
- A Flanged Wooden Shape Is Used To Support The Loads Shown On The Beam The Dimensions Of The Shape Are Shown In The Seco 1 (31.94 KiB) Viewed 44 times
A flanged wooden shape is used to support the loads shown on the beam. The dimensions of the shape are shown in the second figure. Assume LAB=9ft,LBC=2ft,LCD=4ft,LDE=3ft,PC=1820lb,PE−2050lb,wAB=750lb/ft,b1=11in.,b2=2in.,b3=7in1,d1=2in.,d2=6 in., d3=2 in. Consider the entire 18−ft length of the beam and determine: (a) the maximum tension bending stress σT at any location along the beam, and (b) the maximum compression bending stress σC at any location along the beam. Answers: (a) σT= psi. (b) σc= psi,