Page 1 of 1
For the above design, assume that you have used a power transistor switch with the following characteristics. VCE(st)=1
Posted: Thu Jul 14, 2022 2:37 pm
by answerhappygod
- For The Above Design Assume That You Have Used A Power Transistor Switch With The Following Characteristics Vce St 1 1 (21.78 KiB) Viewed 35 times
For the above design, assume that you have used a power transistor switch with the following characteristics. VCE(st)=1.5 VtSW(on)=1.2μF and tSW(off)=4μFIleakage =1 mA If the switching frequency is 150 Hz with 50% duty cycle find: (a) i) On-state and Off-state energy losses ii) Maximum power losses during On-state and Off-state iii) Energy losses during Turn-on and Turn-off iv) Total Energy loss v) Average power loss