8 = 0.5 mm 2 (2) B B @c "Rigid" D L (1) P b b 8 = 0,5 mm Propiedades del sistema L1 = L2 = 2m A, = A2 = 126,7 mm2 di =
Posted: Tue Apr 26, 2022 3:59 pm
- 8 0 5 Mm 2 2 B B C Rigid D L 1 P B B 8 0 5 Mm Propiedades Del Sistema L1 L2 2m A A2 126 7 Mm2 Di 1 (7.7 KiB) Viewed 47 times
at B and by vertical steel bars attached to the beam at
points A and C. Neglect the weight of the beam. The
item (1) was manufactured to the correct length and, when
only rod (1) is attached to beam AD, the beam is
horizontal (i.e. 𝜃 = 0°). Element (2), on the other hand,
a shorter 𝜹̅ was manufactured, and has to be stretched
manually to connect it to the beam using a
pin at C. All this happens before placing
any other load.
Once the bars have been assembled to the system, a
load 𝑷=28.0 kN and the temperature of the
bars is reduced by ∆𝑻=20.0°C.
Determine:
a) The stresses in the bars (given in MPa).
b) The angle of twist of the rigid bar AD (given in
degrees, defines the sense).
- 8 0 5 Mm 2 2 B B C Rigid D L 1 P B B 8 0 5 Mm Propiedades Del Sistema L1 L2 2m A A2 126 7 Mm2 Di 2 (13.25 KiB) Viewed 47 times
8 = 0,5 mm Propiedades del sistema L1 = L2 = 2m A, = A2 = 126,7 mm2 di = a 2 = 12 x10-6/°C b= 2 m *Las barras son exactamente iguales. E = E2 = 200 GPa a = 1 m