A melt is poured in a mould with a velocity 1m/s through bottom of sprue which has a diameter of 5mm. Determine whether
Posted: Tue Apr 26, 2022 3:29 pm
A melt is poured in a mould with a velocity 1m/s through bottom of sprue which has a diameter of
5mm. Determine whether the flow in turbulent. Assume the properties of melt as density (ρ = 7860
kg/m3 and viscosity at pouring temp ( = 2.25 x 10‐3 Ns/m2
.
irks = 10 marks) i. A melt is poured in a mould with a velocity 1m/s through bottom of sprue which has a diameter of 5mm. Determine whether the flow in turbulent. Assume the properties of melt as density (p) = 7860 kg/m3 and viscosity at pouring temp (u) = 2.25 x 10-3 Ns/m2. ii. Briefly explain the principles of fluid flow significant in gating design.
5mm. Determine whether the flow in turbulent. Assume the properties of melt as density (ρ = 7860
kg/m3 and viscosity at pouring temp ( = 2.25 x 10‐3 Ns/m2
.
- A Melt Is Poured In A Mould With A Velocity 1m S Through Bottom Of Sprue Which Has A Diameter Of 5mm Determine Whether 1 (28.65 KiB) Viewed 33 times