Cantilever Beam I – A uniform distributed load of 5,000 N/m is applied to a cantilever beam. The beam has a length of 1
Posted: Tue Apr 26, 2022 3:26 pm
Cantilever Beam I – A uniform distributed load of 5,000
N/m is applied to a cantilever beam. The beam has a length of 1 m
and a square cross-section of 3 x 3 cm. Evaluate the effect of
material selection by plotting the displacement of the beam (m) as
function of the x distance (m) for three different materials:
Aluminum (E = 69 GPa), Titanium (E = 116 GPa), and Carbon Fiber
Reinforced Plastic, CFRP, (E = 150 GPa).
Seeing the answer on paper as well as MATLAB if able would be
greatly appreciated!
5,000 Nm 3 cm
N/m is applied to a cantilever beam. The beam has a length of 1 m
and a square cross-section of 3 x 3 cm. Evaluate the effect of
material selection by plotting the displacement of the beam (m) as
function of the x distance (m) for three different materials:
Aluminum (E = 69 GPa), Titanium (E = 116 GPa), and Carbon Fiber
Reinforced Plastic, CFRP, (E = 150 GPa).
- Cantilever Beam I A Uniform Distributed Load Of 5 000 N M Is Applied To A Cantilever Beam The Beam Has A Length Of 1 1 (3.86 KiB) Viewed 36 times
greatly appreciated!
5,000 Nm 3 cm