In order to check the CLR function of a counter ____________
Posted: Thu Jul 14, 2022 12:01 pm
a) Apply the active level to the CLR input and check all of the Q outputs to see if they are all in their reset state
b) Ground the CLR input and check to be sure that all of the Q outputs are LOW
c) Connect the CLR input to Vcc and check to see if all of the Q outputs are HIGH
d) Connect the CLR to its correct active level while clocking the counter; check to make sure that all of the Q outputs are toggling
b) Ground the CLR input and check to be sure that all of the Q outputs are LOW
c) Connect the CLR input to Vcc and check to see if all of the Q outputs are HIGH
d) Connect the CLR to its correct active level while clocking the counter; check to make sure that all of the Q outputs are toggling