Plot dielectric noise (in V/ÖHz, not RMS value), thermo-mechanical noise (Q=100) and Ven, respectively (individually) at
Posted: Tue Apr 26, 2022 3:00 pm
Plot dielectric noise (in V/ÖHz, not RMS value),
thermo-mechanical noise (Q=100) and Ven, respectively
(individually) at the input of the amplifier, from 1 Hz to 200 Hz
using Matlab. Assume the loss factor h=0.02 and use Sv
calculated in problem Ven is the input voltage noise of
AD795. Discuss which noise is dominant (this may be
frequency dependent).
thermo-mechanical noise (Q=100) and Ven, respectively
(individually) at the input of the amplifier, from 1 Hz to 200 Hz
using Matlab. Assume the loss factor h=0.02 and use Sv
calculated in problem Ven is the input voltage noise of
AD795. Discuss which noise is dominant (this may be
frequency dependent).