1K PROCEDURE: To achieve the 0 to 10V square wave from the Model 25 Wavetek Function Generator it will be necessary to a
Posted: Tue Apr 26, 2022 2:20 pm
- 1k Procedure To Achieve The 0 To 10v Square Wave From The Model 25 Wavetek Function Generator It Will Be Necessary To A 1 (102.93 KiB) Viewed 36 times
- 1k Procedure To Achieve The 0 To 10v Square Wave From The Model 25 Wavetek Function Generator It Will Be Necessary To A 2 (52.78 KiB) Viewed 36 times
- 1k Procedure To Achieve The 0 To 10v Square Wave From The Model 25 Wavetek Function Generator It Will Be Necessary To A 3 (55.93 KiB) Viewed 36 times
asked i will surely like it.
1K PROCEDURE: To achieve the 0 to 10V square wave from the Model 25 Wavetek Function Generator it will be necessary to adjust the DC offset and amplitude controls. 1. 1.5K 10V --- w Vout VN 3K 0.15 uF=C sk 5 ms ov- ->2.5 ms To Fig 11-2 Circuit for evaluating the RC circuit response A) Measure the value of Vout after 3RC (3 time constants) from To. B) Measure the time for Vout to reach 5V from To. C) Change C to 0.33 uF, then measure the time for Vout to reach 5V from To.
750 10V - DV 47 mH VING } 510 ims k- L VR 100 2 ms TO Fig 11-3 Circuit for evaluating the RL circuit response Capture VR in time relation with Vis starting at To. Note that I = VR/ 100 Show the value of current on the sketch after 3 time constants from To.
4. 750 10V... 100 OV VINE 510 V 1ms 47mH 2 ms To Fig 11-4 Circuit for measuring the voltage across the inductor Capture V. in time relation with Vin starting at To. Show the value of V. on the capture after one time constant from To.