Page 1 of 1
Circuit VA V1 VB Vc А B с 330 Ω 4V 220 Ω V2 100 5V lv VO D Figure 3: DC Circuit with 2 sources Procedures: (a) Connect t
Posted: Tue Apr 26, 2022 1:59 pm
by answerhappygod
- 1 (68.55 KiB) Viewed 45 times
Circuit VA V1 VB Vc А B с 330 Ω 4V 220 Ω V2 100 5V lv VO D Figure 3: DC Circuit with 2 sources Procedures: (a) Connect the circuit in Figure 3. (b) Measure potential difference (voltage), V1, V2 & V3 across each resistor. (c) Measure node voltages VA, VB & Vc with respect to VD (reference). (d) Measure the current 11, 12 & 13 in each branch. Observations & Results 1) Tabulate the voltage difference, node voltages and current in each branch in Table 2. Note: Use passive sign convention on each resistor based on the voltage polarity assumed in the schematic. Current Measurement (A) Voltage Measurement (V) V1 11 V2 V3 12 VA VB 13 VC Table 2: Circuit Measurements 2) Verify the voltage measurements.