Answer Happy

The two members pinned together at B. If the pins have an allowable shear stress of τallow= 150 MPa, and allowable tensile stress of rod CB is (σt) allow = 180 MPa. Determine will the structure will fail or not if Pin seize that are installed is 12 mm and Rod CB diameters is 12 mm. if the structure will fail, which part is responsible which pin or rod? (Note: Pin sizes installed is the same)
10 kN a fo 60° B B tan al tan B Pin T allow Rod t allow = 1/2 = 3/4 120 MPa 150 MPa 3 m + Connection B Connection A = The two members pinned together at B. If the pins have an allowable shear stress of tallow = 120 MPa For Odd NIM and 150 MPa For Even NIM, and allowable tensile stress of rod CB is (ot) allow = 150 MPa for Odd NIM and 180 MPa for Even NIM. Determine will the structure will fail or not if Pin seize that are installed is 12 mm and Rod CB diameters is 12 mm. if the structure will fail, which part is responsible which pin or rod? (Note: Pin sizes installed is the same) (LO 1: 25%)