Answer Happy

Student no.759
Please answer all questions ASAP
2. Determine the displacement at D and slope at C for the cantilever beam made of structural steel. The support B is pinned and the support is considered to be a roller support. P D B L L L Figure 1b) Cantilever beam with loading condition Data to be used For figure 1a): Take 'a' as the last digit of your student number in metres (If your student number ends with zero then take 'a' = 5 m). b=1.5a. Take P as the last 2 digits of your student number in KN and w=P/4. For figure 1b): Take P as the last 2 digits of your student number in kN and Take 'L'as the 0.5 times the last digit of your student number in metres. The cross section details for sections for both figures 1a) and 1b) can be taken from table 1 against your student number IPE Height width thicknes thicknes Weight Surface H tw tf W kg/m area m2/m 300 300 150 7.1 10.7 1.16 43