A H steel pile is driven into sand as shown in the figure. The dimensions of the pile section, including the soil plug,
Posted: Tue Apr 26, 2022 1:22 pm
- A H Steel Pile Is Driven Into Sand As Shown In The Figure The Dimensions Of The Pile Section Including The Soil Plug 1 (142.52 KiB) Viewed 43 times
A H steel pile is driven into sand as shown in the figure. The dimensions of the pile section, including the soil plug, are 308 mm by 310 mm. Other required soil parameters are also shown in the figure. S (a) Calculate the ultimate point load (Qp) using the bearing capacity factors from: (i) Meyerhof s Method' and (ii) Berezantzev's Method. (b) Calculate the ultimate frictional resistance, with K = 1.4, and != 0.60. Calculate the allowable pile load, using a factor of safety of 4. Compare the allowable pile load obtained from (c) with the allowable load capacity of the steel section of the pile, using an allowable stress of 62,000 kN/m2 and cross section area of 14.1 x 10-3 m² for the steel section of the H pile. Sm Y = 15.1 is 30° се о I water I table sand Yra = 18.1 yor ? 18m 9. = 38 - Ysd = 194 19 *** Dense sand 4.40 C=