Page 1 of 1
1. The transfer function, G(s) of a control system is given as 10 G(s) = s(0.1s + 1)(s + 1) The closed-loop stability of
Posted: Tue Jul 12, 2022 11:53 am
by answerhappygod
- 1 The Transfer Function G S Of A Control System Is Given As 10 G S S 0 1s 1 S 1 The Closed Loop Stability Of 1 (20.1 KiB) Viewed 32 times
1. The transfer function, G(s) of a control system is given as 10 G(s) = s(0.1s + 1)(s + 1) The closed-loop stability of above system can be easily analyzed using Bode plot technique. The following steps are the typical procedure to establish the Bode plot; Normalized transfer function: G(s) = The break frequencies: wf = 1,10 rad/s Starting frequency: one decade of minimum w: 0.1 rad/s Gradient table of Magnitude and Phase: Pole/Zerowat Spâ‚‚ = -1 S3 = -10 Total Gradient Pole/Zero waT Sp2 = -1 Spa=-10 Total Gradient Wat = 0.1 10 s(0.1s + 1)(s + 1) Way = 0.1 Magnitude gradient war = 10 Why = 1 Way = 1 Phase gradient Way = 10 way = 100 Wy=100