Page 1 of 1
A full journal bearing has a journal diameter of 29 mm, with a unilateral tolerance of -0.01 mm. The bushing bore has a
Posted: Tue Jul 12, 2022 8:47 am
by answerhappygod
- A Full Journal Bearing Has A Journal Diameter Of 29 Mm With A Unilateral Tolerance Of 0 01 Mm The Bushing Bore Has A 1 (17.63 KiB) Viewed 85 times
A full journal bearing has a journal diameter of 29 mm, with a unilateral tolerance of -0.01 mm. The bushing bore has a diameter of 29.04 mm and a unilateral tolerance of 0.03 mm. The I/d ratio is unity. The load is 1.2 kN, and the journal runs at 636.2393 rev/min. If the average viscosity is 50 mPa.s, find the minimum film thickness, the power loss, and the percentage of side flow for the minimum clearance assembly. The minimum film thickness is [ The power loss is [ W. The percentage of side flow for the minimum clearance assembly is [ mm. %.