I need help filling out these tables. Thanks
Posted: Tue Jul 12, 2022 8:17 am
I need help filling out these tables. Thanks
Objectives In this lab you will design a VLSM addressing scheme given a network address and host requirements. You will configure addressing on routers, switches, and network hosts. Design a VLSM IP addressing scheme given requirements. Configure addressing on network devices and hosts. Verify IP connectivity. Troubleshoot connectivity issues as required. Background / Scenario You have been asked to design, implement, and test an addressing scheme for a customer. The customer has given you the network address that is suitable for the network, the topology, and the host requirements. You will implement and test your design. Instructions You have been given the network address 192.168.203.0/24 by your customer. The host address requirements are: Note: Some of the information is provided in the Packet Tracer instructions for your topology. Requirements Host Requirements: LAN ES-1 LAN ES-2 LAN WS-1 LAN WS-2 LAN Design Requirements Time Elapsed: 02:00:05 Top Dock Check Results 21 14 32 19 Number of Addresses Required Back 1/1 Completion: 0% Next
7:07 PM Mon Jul 11, Done 11.10.1 Packet Tracer - Design and Implement a VLSM Addressing Scheme (19 of 31) www Design Requirements • Create the addressing design. Follow guidelines provided in the curriculum regarding the order of the subnets. • The subnets should be contiguous. There should be no unused address space between subnets. • Provide the most efficient subnet possible for the point-to-point link between the routers. . • Document your design in a table such as the one below. Subnet Description Number of Hosts Needed Network Address/CIDR First Usable Hosti Address: Broadcast Address @81%
7:08 PM Mon Jul 11 Done Packet Tracer - Design and Implement a VLSM Addressing Scheme Addressing Table Device Interface IP Address Subnet Mask Default Gateway GO/0 GO/1 S0/0/0 GO/0 GO/1 S0/0/0 VLAN 1 VLAN 1 VLAN I VLAN 1 NIC NIC NIC NIC 11.10.1 Packet Tracer - Design and Implement a VLSM Addressing Scheme (19 of 31) Obiectives. N/A N/A N/A N/A N/A N/A @81% P
- I Need Help Filling Out These Tables Thanks 1 (66.02 KiB) Viewed 27 times
- I Need Help Filling Out These Tables Thanks 2 (30.96 KiB) Viewed 27 times
- I Need Help Filling Out These Tables Thanks 3 (39.28 KiB) Viewed 27 times
7:07 PM Mon Jul 11, Done 11.10.1 Packet Tracer - Design and Implement a VLSM Addressing Scheme (19 of 31) www Design Requirements • Create the addressing design. Follow guidelines provided in the curriculum regarding the order of the subnets. • The subnets should be contiguous. There should be no unused address space between subnets. • Provide the most efficient subnet possible for the point-to-point link between the routers. . • Document your design in a table such as the one below. Subnet Description Number of Hosts Needed Network Address/CIDR First Usable Hosti Address: Broadcast Address @81%
7:08 PM Mon Jul 11 Done Packet Tracer - Design and Implement a VLSM Addressing Scheme Addressing Table Device Interface IP Address Subnet Mask Default Gateway GO/0 GO/1 S0/0/0 GO/0 GO/1 S0/0/0 VLAN 1 VLAN 1 VLAN I VLAN 1 NIC NIC NIC NIC 11.10.1 Packet Tracer - Design and Implement a VLSM Addressing Scheme (19 of 31) Obiectives. N/A N/A N/A N/A N/A N/A @81% P