Bottom chord of truss is composed of two angle bars each having a dimension of 192 mm x 95 mm x 5.4 mm. Between them is
Posted: Mon Apr 25, 2022 9:01 am
Bottom chord of truss is composed of two angle bars each having
a dimension of 192 mm x 95 mm x 5.4 mm. Between them is a gusset
plate, 9.5mm thick. At each end of joints, four 19mm-dia. bolts are
fastened along the gage line, having an edge distance of 40 mm and
63.5mm pitch. Use A36 steel Fy = 248 MPa Fu = 400 MPa spacing of
bolt = 59.4 mm
Compute the capacity of the bottom chord based on block shear
strength, in KN.
$ S S с pitch w 9.5mm thick gusset plate + edge dist
a dimension of 192 mm x 95 mm x 5.4 mm. Between them is a gusset
plate, 9.5mm thick. At each end of joints, four 19mm-dia. bolts are
fastened along the gage line, having an edge distance of 40 mm and
63.5mm pitch. Use A36 steel Fy = 248 MPa Fu = 400 MPa spacing of
bolt = 59.4 mm
Compute the capacity of the bottom chord based on block shear
strength, in KN.
- Bottom Chord Of Truss Is Composed Of Two Angle Bars Each Having A Dimension Of 192 Mm X 95 Mm X 5 4 Mm Between Them Is 1 (39.42 KiB) Viewed 69 times