Page 1 of 1
Q3 (a) As a junior structural engineer, you are responsible to prepare the analysis report of steel beam and present to
Posted: Mon Jul 11, 2022 10:16 am
by answerhappygod
- Q3 A As A Junior Structural Engineer You Are Responsible To Prepare The Analysis Report Of Steel Beam And Present To 1 (33.93 KiB) Viewed 29 times
- Q3 A As A Junior Structural Engineer You Are Responsible To Prepare The Analysis Report Of Steel Beam And Present To 2 (26.39 KiB) Viewed 29 times
Q3 (a) As a junior structural engineer, you are responsible to prepare the analysis report of steel beam and present to the chief structural engineer. That steel beam has been designed with fixed support at point A and pinned support at Point C as shown in Figure Q3 (a). Your report should have the following items; (i) the influence line for the vertical reaction and moment at Point A. (8 marks) (ii) the maximum moment at Point B if concentrated load of 100 kN is applied at Point B and 30 kN/m uniform load is applied from Point B to C. (4 marks) (b) You have been appointed as a junior structural engineer to design a truss bridge across Sungai Kiri with a pin and roller supports at point A and G, respectively as shown in Figure Q3 (b). The span of each horizontal member is 4 m and the height of vertical member is also 4 m. Your task is analyze and present the influence diagram for members JK and DE. (13 marks)
-10 m- H B FIGURE Q3 (a) AND C E 6 panels @ 4 m = 24 m -20 m- FIGURE Q3 (b) TH ↑ 4 m G...