A drive is desired for 1,500 W, 200 rpm drive shaft to 70 rpm driven shaft to operate at 11—16 h/day and at a center dis
Posted: Mon Jul 11, 2022 10:06 am
A drive is desired for 1,500 W, 200 rpm drive shaft to 70 rpmdriven shaft to operate at
11—16 h/day and at a center distance of approximately 80 mm,with light shock load and with drip
lubrication. Find the following:
a.) Speed ratio
b.) Service factor
c.) Design power
d.) Module and number of teeth of driving gear
e.) Number of teeth of driven gear
f.) Center distance
g.) Gear selection
11—16 h/day and at a center distance of approximately 80 mm,with light shock load and with drip
lubrication. Find the following:
a.) Speed ratio
b.) Service factor
c.) Design power
d.) Module and number of teeth of driving gear
e.) Number of teeth of driven gear
f.) Center distance
g.) Gear selection