A single-disk dry clutch (Similar to Fig 18.2 in book), is to be designed for use with an engine with a maximum torque o
Posted: Sun Jul 10, 2022 11:43 am
A single-disk dry clutch (Similar to Fig 18.2 in book), is to bedesigned for use with an engine with a maximum torque of325 N m. A friction material is to be used forwhich design values are f = 0.30 and pmax = 300kPa. A safety factor of 1.6 should be used with respect toslippage at full engine torque, and the outside diameter should beas small as possible. Determine appropriate values of ro , ri ,and F. Assume inner diameter of disk = 0.5 * outerdiameter.
(Hint: Take Number of interfaces, N = 2 for Single-diskclutch).
(Hint: Take Number of interfaces, N = 2 for Single-diskclutch).