Page 1 of 1

A reheat steam cycle has 13.85 MPa throttle pressure at the turbine inlet and a 2,8 MPa reheat pressure, the throttle an

Posted: Fri Jul 08, 2022 5:47 am
by answerhappygod
A Reheat Steam Cycle Has 13 85 Mpa Throttle Pressure At The Turbine Inlet And A 2 8 Mpa Reheat Pressure The Throttle An 1
A Reheat Steam Cycle Has 13 85 Mpa Throttle Pressure At The Turbine Inlet And A 2 8 Mpa Reheat Pressure The Throttle An 1 (221.26 KiB) Viewed 30 times
A reheat steam cycle has 13.85 MPa throttle pressure at the turbine inlet and a 2,8 MPa reheat pressure, the throttle and reheat temperature of the steam is 540°c, condenser pressure is 3,4 kpa, engine efficiency of high and low pressure is 75%, find the cycle thermal efficiency. Boiler WW 13.85 MB 540°c Br 2.8 Mpa B HP TURBINE O Pump Wp PIC. a) SCHEMATIC DIACRAM At 13,80 Mpa and T₁ = 540°C h₁ = LP TURBINE 3.4 kpa EX condenser S P-13.85 P=R=2,8 P₁-P=3,4kpa FIC. b TS-Diagram 6