Page 1 of 1
Center-Axis TF The steel screws (E-200GPa, Sy-500MPa, u=800MPa) holding a plate are 5mm in diameter. The Normal Principa
Posted: Thu Jul 07, 2022 1:33 pm
by answerhappygod
- Center Axis Tf The Steel Screws E 200gpa Sy 500mpa U 800mpa Holding A Plate Are 5mm In Diameter The Normal Principa 1 (59.97 KiB) Viewed 23 times
Center-Axis TF The steel screws (E-200GPa, Sy-500MPa, u=800MPa) holding a plate are 5mm in diameter. The Normal Principal Stress, s1= 15MPa. What is the safety factor in Yield stress using the Maximum Normal Stress Theory? 16.66 O 26.67 O 53.33 33.33 A Moving to the next
question prevents changes to this answer. DELL
Question 2 of 13 D
Question 2 of 33>