Page 1 of 1
Problem 3 The two angle bars are used to support a tensile load "T". Assume the tensile load to be equally resisted by e
Posted: Tue Apr 12, 2022 10:35 am
by answerhappygod
- Problem 3 The Two Angle Bars Are Used To Support A Tensile Load T Assume The Tensile Load To Be Equally Resisted By E 1 (37.77 KiB) Viewed 33 times
Problem 3 The two angle bars are used to support a tensile load "T". Assume the tensile load to be equally resisted by each angle. 400 mm x 20 m THK Gusset Plate The steel used is L6x6x 1. Properties: A = 7096.76 mm y = 47.244 mm b= 152.4 mm F, = 248 MPa t = 25.4 mm F. = 400 MPa * = 47.244 mm Effective hole diameter = 25 mm T b Use case 2 for shear lag factor. Use NSCP 2015 code. 1. Determine the maximum allowable load that can be carried by the two L6 x 6 x 1 based on yielding of the gross section-----10pts) 2. Determine the maximum factored load that can be carried by two L6x6x1, based on the fracture of the effective net area.--------(10pts) 3. Determine the maximum allowable tensile load that can be carried.-10 pts) 4. Determine the maximum factored tensile load that can be carried -(10pts)