Page 1 of 1
A particular manufacturing design requires a shaft with a diameter of 17.000 mm, but shafts with diameters between 16.98
Posted: Wed Jul 06, 2022 12:10 pm
by answerhappygod
- A Particular Manufacturing Design Requires A Shaft With A Diameter Of 17 000 Mm But Shafts With Diameters Between 16 98 1 (27.22 KiB) Viewed 20 times
A particular manufacturing design requires a shaft with a diameter of 17.000 mm, but shafts with diameters between 16.989 mm and 17.011 mm are acceptable. The manufacturing process yields shafts with diameters normally distributed, with a mean of 17.005 mm and a standard deviation of 0.006 mm. Complete parts (a) through (d) below. a. For this process, what is the proportion of shafts with a diameter between 16.989 mm and 17.000 mm? The proportion of shafts with diameter between 16.989 mm and 17.000 mm is (Round to four decimal places as needed.)