Page 1 of 1
Q.2 A set of external loads is acting on a continuous beam ABCD of various flexural rigidities (EI) as shown in Figure Q
Posted: Sun Apr 10, 2022 6:31 pm
by answerhappygod
- Q 2 A Set Of External Loads Is Acting On A Continuous Beam Abcd Of Various Flexural Rigidities Ei As Shown In Figure Q 1 (41.44 KiB) Viewed 48 times
Q.2 A set of external loads is acting on a continuous beam ABCD of various flexural rigidities (EI) as shown in Figure Q.2. The beam has a fixed support at D and roller supports at A, B and Crespectively. Analyze the continuous beam by using "Moment Distribution Method". (a) Determine the fixed end moments at the supports due to external loads. (b) Determine the distribution factors at the joints. (c) Determine the final member-end moments by moment distribution method. (d) Draw and label the bending moment diagram. [Note: The calculation can be considered complete when the balancing moments (distributed moments) are less than 0.1 kNm.] 80 kNm 150 kN 150 KN تنبلی لیستیک 36 kN/m D ЗЕІ B 2EI 4ET 6 m 3 m m 3 m 3 m 7 m m Figure Q.2